english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
10.5L 수냉식 엔진 575hp-800hp Cat 3306 디젤 엔진
10.5L Water Cooling Engine 3306 Diesel Engine Assembly For Construction Machinery Generator Key Features of 3306 diesel engine : 1 Pure mechanical structure, sturdy and durable Fully mechanical control (without electronic ECU), no sensors, no complex circuits, and extremely low failure rate. High strength cast iron cylinder body and forged steel crankshaft, with a general overhaul life of over 20000 hours. Highly tolerant of inferior diesel and harsh working conditions, not 더 보기
4 실린더 3.9L 배량 4BT 엔진 4BT3.9 디젤 엔진 조립
3.9L Displacement 4BT Engine 4BT3.9 Diesel Engine Assembly The Advantage and features of 4BT3.9 engine: The 4BT3.9 diesel engine is a classic 3.9-liter inline four cylinder turbocharged diesel engine from the B-series. It has a durable design, with an average overhaul interval of about 6000 hours, capable of adapting to high-intensity and harsh working conditions. The 4bt3.9 engine using turbocharging technology, which significantly improves intake volume, provides abundant 더 보기
K38 완전 엔진 1200HP 큰 힘 KTA38 12 실린더 디젤 엔진
big power K38 complete engine 12 cylinders 1200HP KTA38 diesel engine The Advantage and features of KTA38 engine: The KTA38 diesel engine is designed with a highly reliable and long-lasting design, it has Integral high-strength alloy cast iron cylinder body and head, replaceable wet cylinder liner, has the advantage of low maintenance cost, long service life. The engine with Dual turbo and intercooler, sufficient intake makes it has a high low-speed torque, and adapt to harsh 더 보기
건설 19L KTTA19 광산용 디젤 엔진 트럭 발전기 발굴기 볼도저
Construction Machinery Engine 19L KTTA19 Diesel Engine For Mining Truck Generator Excavator Bulldozer The Advantage and features of KTTA19 engine: The engine uses dual turbocharging and air-to-air intercooling technology to achieve high-density intake, and can unleash maximum torque at low speeds (1300-1500 rpm). It has fast response for heavy-duty starting and continuous operation, and continuous power output. The KTTA19 engine with PT fuel system, the system is equipped 더 보기
NT855-C360 NT855-C280 커밍스 디젤 엔진 덤프 트럭 엔진
construction machinery diesel engine NT855-C360 NT855-C280 for mining dump truck excavator The Advantage and features of NT855-C engine: This NT855-C engine is sturdy, durable, and has a long service life. The PT fuel system has a simple structure, extremely high reliability, resistance to impurities, easy maintenance, and a long interval between major repairs. The peak torque of this NT855 engine is between 1400-1500RPM, with low speed and high torque, suitable for heavy 더 보기
8.9L 6 실린더 디젤 엔진 ISLe CM2150 CM850 무거운 트럭 코치
brand new 8.9L diesel engine ISLe CM2150 CM850 for heavy truck coach The Advantage and features of ISLe engine: Accurate electronic control, efficient and fuel-efficient, low noise, good cold start. Low torque and high speed, suitable for complex road conditions. Lightweight design, high reliability, and long service life. High emission standards and strong environmental adaptability. Tier 3/4/5 are fully covered, meeting the requirements for highway/non highway emissions. 더 보기
QSK60 커민스 디젤 엔진 V16 실린더 60L 완전 디젤 엔진
V16 cylinder 60L complete diesel engine QSK60 engine assembly for Belaz mining dump truck generator The Advantage and features of QSK60 engine: The QSK60 engine uses an integral high-strength cast iron V-shaped cylinder body, forged steel crankshaft, ductile iron pistons, etc. The overhaul interval is greater than 20000 hours, with an ultra long overhaul cycle and low operating costs. QSK60 engine has high torque at low speed, perfectly matched for heavy-duty starting, 더 보기
6 실린더 엔진 어셈블리 6BT5.9 EQB235-20 트럭 디젤 엔진
6 Cylinders Engine Assembly 6BT5.9 EQB235-20 Diesel Engine For Heavy Truck The Advantage and features of EQB235-20 engine: 1. The EQB235-20 engine using mechanical pump, it is is reliable, sturdy and durable Pure mechanical inline pump (P7100), no ECU, no complex electronic control, resistant to harsh working conditions, high altitude/high temperature/low temperature, easy maintenance, universal parts, low cost; B10 has a lifespan of ≥ 8000 hours and is suitable for heavy 더 보기
X12 QSX12 커민스 디젤 엔진 발굴기 로더 중량 트럭 엔진
Excavator Loader Heavy Truck Engine X12 QSX12 Diesel Engine The Advantage and features of QSX12 engine: The QSX12 engine uses a wide torque platform of 1200-1800rpm, which is suitable for continuous operation, mining, heavy engineering, and long-distance cargo transportation. Using XPI high-pressure common rail technology and dual overhead camshafts, it is efficient and fuel-efficient. Double overhead camshafts (one driving high-pressure oil pump and one control valve) 더 보기
